top of page

Support Group

Public·318 members
Easton King
Easton King

OP-COM Multilanguage: The Best Tool for Opel/Vauxhall Cars from 1987 to 2021


Opcom Multilanguage: A Comprehensive Guide for Opel/Vauxhall Diagnostics




Opcom Multilanguage is a software program that allows you to diagnose and repair electronic systems of Opel/Vauxhall cars from 1987 to 2021. It covers almost all Opel models, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B. In this article, we will show you how to use Opcom Multilanguage to perform various tasks, such as reading and clearing fault codes, showing live data, running output tests, learning keys, resetting and programming immobilizer and service interval reminder, and coding airbags.




Opcom Multilanguage



What is Opcom Multilanguage?




Opcom Multilanguage is a diagnostic interface that works with a USB port on your computer. It supports many languages, such as DE, EN, RU, HU, NL, PL and RO. It works with a multiplexer that selects the appropriate pin for communication with different control units of the car. It supports many protocols, such as Serial Link (ISO9141, KW81, KW82, KWP2000), HSCAN-Dual-wire (High Speed CAN-BUS), MSCAN-Dual-wire (Medium Speed CAN-BUS), and SWCAN-Single-wire (Low Speed CAN-BUS).


Opcom Multilanguage has several advantages over other diagnostic tools. It is compatible with most Windows operating systems, including 64-bit Windows 7. It has a full fault code text description and full status information for each code. It can show you up to 8 measuring block parameters at the same time. It can handle the high speed of the CAN-BUS systems, which is currently 500 kbps. It is also much cheaper than the dealer's tool (TECH2), which requires a 32 MB Card+CANdi interface.


How to Use Opcom Multilanguage?




To use Opcom Multilanguage, you need to have a compatible interface with a genuine PIC18F458 chip and a correct firmware version. The maximum official firmware version is 1.67 on the latest 2020.06 software version. The software will automatically update the firmware when it starts. You also need to have the proper FTDI driver that is maximum 2.10.0.0 and not newer.


Once you have installed the software and connected the interface to your computer and car, you can launch the program and select your vehicle model and year from the menu. Then you can choose the control unit that you want to diagnose or repair from the list. For example, you can choose Engine, Automatic Transmission, ABS, Airbag


How to Read and Clear Fault Codes with Opcom Multilanguage?




One of the most common tasks that you can do with Opcom Multilanguage is to read and clear fault codes from various control units of your car. Fault codes are codes that indicate a problem or malfunction in a system or component. They can help you to identify and fix the issue, or to take your car to a professional mechanic for further diagnosis.


To read and clear fault codes with Opcom Multilanguage, you need to follow these steps:


  • Select the control unit that you want to check from the menu. For example, Engine.



  • Click on the Fault Codes button on the toolbar. The program will scan the control unit and display the fault codes on the screen.



  • You can see the full text description and status information for each code. You can also print out, save, or copy the codes to any other application.



  • To clear the fault codes, click on the Clear Fault Codes button on the toolbar. The program will erase the codes from the control unit and show you a confirmation message.



  • Click on the OK button to return to the main screen.



How to Show Live Data with Opcom Multilanguage?




Another useful feature of Opcom Multilanguage is to show live data from various control units of your car. Live data are real-time values or parameters that indicate the status or performance of a system or component. They can help you to monitor and analyze the operation of your car, or to troubleshoot a problem.


To show live data with Opcom Multilanguage, you need to follow these steps:


  • Select the control unit that you want to check from the menu. For example, Engine.



  • Click on the Measuring Blocks button on the toolbar. The program will show you a list of available measuring blocks for the selected control unit.



  • You can choose up to 8 measuring blocks from the list by clicking on them. The program will display the values of the selected measuring blocks on the screen.



  • You can see the current value, minimum value, maximum value, and unit for each measuring block. You can also change the display mode from numeric to graphical by clicking on the Graph button on the toolbar.



  • To stop showing live data, click on the Stop button on the toolbar.



How to Run Output Tests with Opcom Multilanguage?




Another useful feature of Opcom Multilanguage is to run output tests on various control units of your car. Output tests are tests that activate or deactivate a system or component, such as a relay, a solenoid, a fan, a lamp, etc. They can help you to check the functionality and wiring of your car, or to verify a repair.


To run output tests with Opcom Multilanguage, you need to follow these steps:


  • Select the control unit that you want to check from the menu. For example, Engine.



  • Click on the Output Tests button on the toolbar. The program will show you a list of available output tests for the selected control unit.



  • You can choose one or more output tests from the list by clicking on them. The program will display the instructions and warnings for each output test on the screen.



  • Follow the instructions and warnings carefully and click on the Start button to begin the output test. The program will activate or deactivate the selected system or component and show you the result on the screen.



  • To stop the output test, click on the Stop button on the toolbar.



How to Learn Keys and Program Immobilizer with Opcom Multilanguage?




Another useful feature of Opcom Multilanguage is to learn keys and program immobilizer for your car. The immobilizer is a security system that prevents the car from starting without a valid key. You can learn new keys to the immobilizer, or reset and program the immobilizer if you have lost all your keys or changed your engine control module (ECM), body control module (BCM), or instrument panel cluster (IPC).


To learn keys and program immobilizer with Opcom Multilanguage, you need to follow these steps:


  • Select Immobiliser from the menu.



  • Click on the Learn Keys button on the toolbar. The program will show you the instructions and warnings for learning keys on the screen.



  • You will need to have your vehicle security code, which can be found on the CAR-PASS. Enter your vehicle security code and click on the OK button.



  • Follow the instructions and warnings carefully and insert each key into the ignition switch and turn it to ON position. The program will learn each key and show you the result on the screen.



  • To reset and program immobilizer, click on the Reset Immobiliser button on the toolbar. The program will show you the instructions and warnings for resetting immobilizer on the screen.



  • You will need to have your vehicle security code, which can be found on the CAR-PASS. Enter your vehicle security code and click on the OK button.



  • Follow the instructions and warnings carefully and disconnect and reconnect your battery. The program will reset and program immobilizer and show you the result on the screen.



How to Reset and Program Service Interval Reminder with Opcom Multilanguage?




Another useful feature of Opcom Multilanguage is to reset and program the service interval reminder for your car. The service interval reminder is a feature that reminds you when your car needs a regular maintenance service, such as oil change, filter change, etc. You can reset and program the service interval reminder according to your preferences or the manufacturer's recommendations.


To reset and program the service interval reminder with Opcom Multilanguage, you need to follow these steps:


  • Select Instrument from the menu.



  • Click on the Service Interval Reset button on the toolbar. The program will show you the instructions and warnings for resetting and programming the service interval reminder on the screen.



  • You will need to have your vehicle security code, which can be found on the CAR-PASS. Enter your vehicle security code and click on the OK button.



  • Follow the instructions and warnings carefully and enter the desired service interval in kilometers or miles. The program will reset and program the service interval reminder and show you the result on the screen.



  • Click on the OK button to return to the main screen.



How to Code Airbags with Opcom Multilanguage?




Another useful feature of Opcom Multilanguage is to code airbags for your car. Airbags are safety devices that inflate in case of a collision to protect the occupants of the car. You can code airbags to enable or disable certain features, such as passenger airbag deactivation, seat belt pretensioner activation, etc.


To code airbags with Opcom Multilanguage, you need to follow these steps:


  • Select Airbag from the menu.



  • Click on the Coding button on the toolbar. The program will show you a list of available coding options for the selected airbag system.



  • You can choose one or more coding options from the list by clicking on them. The program will display the instructions and warnings for each coding option on the screen.



  • Follow the instructions and warnings carefully and click on the Do It button to start the coding process. The program will code the airbag system and show you the result on the screen.



  • To undo the coding, click on the Undo It button on the toolbar.



Conclusion




Opcom Multilanguage is a powerful and versatile software program that allows you to diagnose and repair electronic systems of Opel/Vauxhall cars from 1987 to 2021. It covers almost all Opel models, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B. It supports many languages, such as DE, EN, RU, HU, NL, PL and RO. It works with a USB port based diagnostic interface that supports many protocols, such as Serial Link, HSCAN, MSCAN, and SWCAN.


With Opcom Multilanguage, you can perform various tasks, such as reading and clearing fault codes, showing live data, running output tests, learning keys, resetting and programming immobilizer and service interval reminder, and coding airbags. You can also print out, save, or copy the diagnostic information to any other application. You can choose anything from the list of available control units and measuring blocks on your own. You can also handle the high speed of the CAN-BUS systems, which is currently 500 kbps.


Opcom Multilanguage is compatible with most Windows operating systems, including 64-bit Windows 7. It has a full fault code text description and full status information for each code. It can show you up to 8 measuring block parameters at the same time. It is also much cheaper than the dealer's tool (TECH2), which requires a 32 MB Card+CANdi interface.


If you are looking for a reliable and affordable diagnostic tool for your Opel/Vauxhall car, Opcom Multilanguage is a great choice. It will help you to keep your car in good condition and save you time and money on repairs. You can download Opcom Multilanguage from the links provided in this article and enjoy its benefits. 4e3182286b


https://soundcloud.com/angela-coeur/365scores-apk-mod-updated

About

Welcome to the group! You can connect with other members, ge...

Members

  • Future Gandr
  • Albert Corokin
    Albert Corokin
  • panozaa new
    panozaa new
  • PhuongLien NhaSuong
    PhuongLien NhaSuong
  • Mark
    Mark
bottom of page